BACK

Filling machine type V304 with round can infeed table, stainless steel transport system with step 254 mm, pot denester for conical pots without handles, dosing mechanism suitable for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser and central beam with easy height adjustment which carries all the ancillary equipment.

 

Extended filling machine type V304 with pail denester V410 for conical pails with handles, rectangular infeed table with pusher, stainless steel transport system with step 254 mm, pot denester for conical pots without handles, dosing mechanism suitable for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser, lid labeller and central beam with easy height adjustment which carries all the ancillary equipment.

 

 

Extended filling machine type V304 with pail denester V410 for conical pails with handles, rectangular infeed table with pusher, stainless steel transport system with step 254 mm, dosing mechanism suitable for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser and central beam with easy height adjustment which carries all the ancillary equipment. 

Filling machine type V302P with stainless steel transport system with step 254 mm, leak detector, can positioner/side labeller for small self adhesive labels, dosing mechanism suitable for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser and central beam with easy height adjustment which carries all the ancillary equipment.

Filling machine type V302P-Twin with flatchain infeed conveyor mounted in line, stainless steel transport system with step 254 mm, 2 dosing mechanisms each provided with a closed filling head and a side hopper, both suitable for fills between 0.1 L – 5 L in one dosing shot, cap feeder for automatic infeed and tightening of press caps and central beam with easy height adjustment which carries all the ancillary equipment.

A filling machine with 2 volumetric dosing mechanisms allows you to perform a split fill in order to fill bigger sized cans faster (for bigger sized batches) or to fill with 1 dosing mechanism only while the other dosing mechanism is being cleaned and prepared for the next batch or colour.

Fully plc controlled filling machine type V302Twin with rectangular infeed table with pusher, stainless steel transport system with step 254 mm, leak detector, 2 servo driven dosing mechanisms each with a closed filling head and a side hopper, both suitabled for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser for press lids, lid tightener for special designed lids and central beam with easy height adjustment which carries all the ancillary equipment.

With a fully plc controlled machine the majority of the parameters is set-up automatically in less than 30 seconds.

Fully plc controlled filling machine type V302Twin with rectangular infeed table at 90°, stainless steel transport system with step 254 mm, 2 servo driven dosing mechanisms each with a selfcleaning hopper, both suitabled for fills between 0.1 L – 5 L in one dosing shot, lid placer, lid presser for press lids, cap feeder for automatic infeed and tightening of press caps and central beam with easy height adjustment which carries all the ancillary equipment.

With a fully plc controlled machine the majority of the parameters is set-up automatically in less than 30 seconds.

 

Filling machine type V230I with stainless steel transport system with step 420 mm, dosing mechanism suitable for fills between 0.5 L – 20 L in one dosing shot separately adjustable in height and lid closer suitable for press and/or crimp lids separately adjustable in height.

Filling machine type V230I-Trin with flatchain infeed conveyor mounted in line, stainless steel transport system with step 432 mm, 3 dosing mechanisms each suitable for fills between 0.1 L – 5 L in one dosing shot, linked to 1 centralised hopper, lid placer, lid closer suitable for press and/or crimp lids and central beam for easy height adjustment of the ancillary equipment.

Filling machine type V230I-Twin with stainless steel transport system with step 432 mm, 2 dosing mechanisms each suitable for fills between 0.5 L – 20 L in one dosing shot, both separately adjustable in height, lid placer, lid closer suitable for press and/or crimp lids and central beam for easy height adjustment of the ancillary equipment.

 

 

Fully plc controlled filling machine type V300Twin in mirrorview design with small infeed conveyor, stainless steel transport system with step 432 mm, 2 dosing mechanisms each suitable for fills between 0.5 L – 20L in one dosing shot, lid placer, lid closer suitable for press and/or crimp lids and central beam for easy height adjustment of the ancillary equipment.

With a fully plc controlled machine the majority of the parameters are set-up automatically in less than 30 seconds.

BACK