BACK

 

 

Filling machine type V231 with flatchain infeed conveyor mounted in a 90° angle to the stainless steel transport system with step of 395 mm, closed filling head with 2-stage filling actuator for coarse and fine filling mounted on top of an electronic weighing system (available in explosionproof or non explosionproof design), lid placer in front of the machine, lid closer suitable for press and/or crimp lids and non driven outfeed conveyor mounted in a 90° angle as a buffer table.

In standard design, the filling method is above level filling. Subject to the type of product, below bunghole or submerged filling methods are also available.

Fully plc controlled filling machine type V301Trin with stainless steel transport system with step 432 mm, 3 closed filling heads, the first two of which have a 1-stage filling actuator suitable for coarse filling and the 3rd filling head with 2-stage filling actuator for coarse and fine filling mounted on top of an electronic weighing system (available in explosionproof or non explosionproof design), lid placer, lid closer suitable for press and/or crimp lids and central beam with easy height adjustment which carries all the ancillary equipment.

With a fully plc controlled machine the majority of the parameters is set-up automatically in less than 30 seconds.

 

BACK